English
русский
Форма для автомобильной ручки
Automotive MoldAutomotive Mold Characteristics: 1. The mold size is very large, with the heaviest mold weighing nearly 40T; 2. The mold structure is complex; 3. There are many irregular curved surfaces on the parting surface.Больше+
Gas & Water Assisted Injection MoldDifferences between water-assisted and gas-assisted molding: 1. Water-assisted injection molding uses water, which can be recycled and reused, making it cheaper than nitrogen.Больше+
Insert MoldCommon Manufacturing Methods of Injection-molded Insert Products: Generally, there are two methods: 1. Place the insert into the mold before injection molding.Больше+
Plastic Pipe MoldThe booster pressurizes nitrogen in the low-pressure storage cylinder into high-pressure nitrogen and stores it in a high-pressure cylinder, with a maximum pressure of 35MPa during the process.Больше+
Controling method of plastic injection mold temperatureExcept for heat radiation and heat convection from the mold, most of the heat brought into the mold by the plastic needs to be removed by a circulating heat transfer medium through heat conduction...Больше+
Slider designing tips 2The molding parting surface of the slider should be made as a shut-off surface whenever possible, with the shut-off part width at least 8mm, and avoid making it a non-shut-off surface...Больше+
